Jeep Wrangler JK Build

I purchased a 2009 Jeep Wrangler in 2021 with around 118,000 miles.  The initial plan was to install a lift, gears, locker, different wheels, and 33” tires.  Upon further inspection it needed some catchup in the maintenance department before any modifications could be made.  This will be the main build post; I’ll update this as the project evolves. 

Maintenance

• Valve cover gaskets
• Oil pan gasket
• Serpentine belt and tensioner
• Transfer case oil change
• Transmission service filter and pan (with drain plug)
• Flush coolant
• Clean out heater core
• Brake pads and rotors
• Front ball joints and bushings

Modifications

• AEV Dual sport 2.5” lift
• Rancho RS62103 geometry correction brackets
• Quadratec Moab Wheel in 17x8.5 with 5.2in Backspace
• BFG A/T KO2 33” tires (LT285/70R17)
• Eaton 913A589 Detroit Truetrac Rear 30 Spline Differential for Dana 44
• Dana 4.10 gears and install kit
• Front Dana 44 Rubicon Locking front axle
• Wire up front e locker